Session Table Station Number = * Station Constraint = Y ; Y/N Satellite Number = * Satellite Constraint = Y ; Y/N (next two lines are free-format but 'all' must be present) all a e i n w M rad1 rad2 rad3 rad4 rad5 rad6 rad7 rad8 rad9 10.00 10.00 10.00 10.00 10.00 10.00 100.0 100.0 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Processing agency = SIO ; Mandatory (3-character limitation) Type of analysis = 0-ITERATION ; PREFIT/QUICK/0-ITERATION/1-ITERATION/2-ITERATION/ Data status = RAW ; RAW/CLEAN SOLVE-only = NO ; YES/NO (= YES replaces old 3-CLEAN) SCANDD control = NONE ; FULL (default), FIRST, BOTH, IFBAD, NONE Choice of observable = LC_HELP ; L1_SINGLE/L1&L2/L1_ONLY/L2_ONLY/LC/ ; L1,L2_INDEPEND./LC_HELP/LC_RANGE Choice of experiment = RELAX ; BASELINE/RELAX/ORBIT/KINEMATIC Ionospheric constraints = 0.0 mm + 99.00 ppm Tropospheric constraints = NO ; YES/NO Zenith Delay Estimation = YES ; YES/NO Zenith model = PWL ; PWL (piecewise linear)/CON (step) Number zen = 13 ; number of zenith-delay parameters Zenith constraints = 0.500 ; zenith-delay a priori constraint in meters Zenith variation = 0.020 100.0 ; zenith-delay variation, tau in meters/sqrt(hr), hrs (default .02 100.) Station constraint = Y ; Y/N Tide Model = 15 ; Binary coded: 1 earth, 2 freq-dep, 4 pole, 8 ocean def=1 Earth rotation = 3 ; Diurnal/Semidirunal terms: Binary coded: 1=pole 2=UT1 default=3 Antenna model = NONE ; NONE/ELEV/AZEL default = NONE Export orbits = YES ; YES/NO Orbit format = SP3 ; SP1/SP3 (NGS Standard Products) Orbit organization = SIO ; SIO (3-character limitation) Reference system for Orbit = ITR93 ; ITR92/ITR91/ITR90/WGS84/MERIT Inertial frame = J2000 ; J2000/B1950 default = B1950 Radiation model for ARC = BERNE ; SPHRC/ROCK4 default = SPHRC Delete MODEL input C-files = NO ; YES/NO default = NO H-file solutions = ALL ; ALL ; LOOSE-ONLY Delete all input C-files = YES ; YES/NO default = NO Initial ARC = YES ; YES/NO default = NO for BASELINE/KIINEMATIC, YES for RELAX/ORBIT Final ARC = NO ; YES/NO Update T/L files = T_AND_L ; T_AND_L (default), T_ONLY, L_ONLY, NONE (Applies only to update for full solution after quick) Update tolerance = .001 m ; Update l-file if site adjustment smaller than tolerance Clean option = AUTCLN ; AUTCLN/SINCLN/DBLCLN AUTCLN command file = autcln.cmd ; Edit AUTCLN command file = YES ; YES/NO default = NO Iteration = XFILES ; XFILES/CFILES Estimate EOP = 15 ; Binary coded: 1 wob, 2 ut1, 4 wob_rate, 8 ut1_rate (15 = all eop) Wobble constraint = 0.3 0.03 ; default = 3. 0.3 (arcsec, arcsec/day) = 100 m 10 m/d UT1 constraint = 2.e-5 0.020 ; default = 2.e-5 0.02 (sec, sec/day) = 1 cm 10 m/d X-compress = NO ; Uncompress/compress X-files default = NO Run CTOX = NO ; Make clean X-files from C-files Delete eclipse data = POST ; ALL/NO/POST (Default = NO); 30 mins post shadow removal is hardwired for ALL/POST Atmospheric gradients = Y ; Number grad = 3 ; number of N/S or E/W gradient parameters per station per session Gradient Constraints = 0.03 ; gradient at 10 deg elevation in meters; default 0.03 m Gradient Variation = 0.01 100. ; gradient-delay variation, tau in meters/sqrt(hr), hrs (default .02 100.) Gradient Model = PWL ; CON (constant or step) / PWL (piecewise linear) AUTCLN Postfit = YES ; Run autcln for postfit run Delete AUTCLN input C-files = I ; YES/NO default = NO ; I -- Intermediate keep (stops) second model Use N-file = Y ; Y/N (default no): automatic procedure to reweight by station Station Error = ELEVATION 10. 0.0001 ; 1-way L1 , a**2 + b**2/sin(elev)**2 in mm, default = 4.3 7.0 #ation Error = ELEVATION 4.3 7.0 ; 1-way L1 , a**2 + b**2/sin(elev)**2 in mm, default = 4.3 7.0 Decimation factor = 4 ; Decimation factor in solve Quick-pre observable = LC ; For 1st iter or autcln pre, default same as Choice of observable Quick-pre decimation factor = 20 ; 1st iter or autcln pre, default same as Decimation Factor Ambiguity resolution WL = 0.15 0.15 1000. 10. 2000. ; default = 0.15 0.15 1000. 10. 1000. (last entry is maximum baseline length) Ambiguity resolution NL = 0.15 0.15 1000. 10. 2000. ; default = 0.15 0.15 1000. 10. 1000. (last entry is maximum baseline length) Notes: PREFIT : Prefit manipulations including cleaning (no solution) QUICK : Quick solution 0-ITERATION : Full solution with good prior station coordinates 1-ITERATION : Full solution with good prior station coordinates 2-ITERATION : Full solution with approximate prior station coordinates Optional controls: Inertial frame = J2000 ; J2000/B1950 default = B1950 Initial ARC ; YES/NO default = NO for BASELINE/KIINEMATIC, YES for RELAX/ORBIT Final ARC ; YES/NO default = YES Radiation Model for ARC ; SPHRC/ROCK4 default = SPHRC Tabular interval for ARC ; 900. seconds (new default), 1350. seconds (old default) Stepsize for ARC ; 75. seconds (new default), 168.75 seconds (old default) Reference System for ARC = IGS92 ; WGS84/WGS72/MERIT/IGS92 Earth Rotation ; Diurnal/Semidirunal terms: Binary coded: 1=pole 2=UT1 default=3 Estimate EOP ; Binary coded: 1 wob 2 ut1 4 wob rate 8 ut1 rate EOP Constraints: ; default = 3. 3. 0.2 (x y arcsec, UT1 sec) Wobble Constraint = 3. 0.3 ; = .3 .3 0.02 (xdot, ydot, UT1dot) UT1 Constraint = 2.e-5 0.02 Antenna Model ; NONE/ELEV/AZEL default = NONE Tide Model ; Binary coded: 1 earth 2 freq-dep 4 pole 8 ocean default = 1 SOLVE batch file ; NEW (default) required with SOLVE > 9.31 Ambiguity resolution WL ; default = 0.15 0.15 1000. 10. 1000. (last entry is maximum baseline length) Ambiguity resolution NL ; default = 0.15 0.15 1000. 10. 1000. (last entry is maximum baseline length) Type of Biases : IMPLICIT (default for quick), EXPLICIT (default for full) H-file solutions ; ALL ; LOOSE-ONLY Export Orbits ; YES/NO default = NO Orbit id ; 4-char code read only if Export Orbits = YES Orbit Format ; SP1/SP3 (NGS Standard Products) Orbit organization ; 3-char code read only if Export Orbits = YES Reference System for Orbit = ITR93 ; ITR92/ITR91/ITR90/WGS84/MERIT (for SP3 header) Delete all input C-files ; YES/NO default = NO Delete MODEL input C-files ; YES/NO default = NO Delete SINCLN input C-files ; YES/NO default = NO Delete DBLCLN input C-files ; YES/NO default = NO Delete AUTCLN input C-files ; YES/NO default = NO Update T/L files ; T_AND_L (default), T_ONLY, L_ONLY, NONE (Applies only to update for full solution after quick) Clean Option ; SINCLN/AUTCLN(default)/DBLCLN AUTCLN Command File ; Filename; default none (use default options) Edit AUTCLN Command File ; YES/NO; default = NO Iteration ; CFILES / XFILES (default) Delete eclipse data = POST ; ALL/NO/POST (Default = NO); 30 mins post shadow removal is hardwired for ALL/POST SCANDD control = NONE ; FULL (default), FIRST, BOTH, IFBAD, NONE Data Status = RAW ; RAW/CLEAN SOLVE-only = NO ; YES/NO (= YES replaces old 3-CLEAN)